Operation CHARM: Car repair manuals for everyone.

Lighting System

ON-VEHICLE INSPECTION







1. INSPECT TURN SIGNAL FLASHER ASSEMBLY CIRCUIT
If circuit is as specified, replace the relay.
If circuit is not as specified, inspect the circuits connected to other parts.

a. Disconnect the flasher relay connector.
b. Inspect the connector on the wire harness side, as shown.










2. INSPECT TOWING CONVERTER RELAY CIRCUIT
Remove the towing converter with connector still connected and inspect the wire harness side connector from the back side as shown in the table.
If the circuit is not as specified, inspect the circuit connected to other parts.