Air Conditioning System (Automatic)
DTC B1423/23 Pressure Sensor CircuitDESCRIPTION
DTC Detection Condition:
This DTC is output when refrigerant pressure on the high pressure side is extremely low (0.19 MPa (2.0 kgf/sq.cm, 28 psi) or less) or extremely high (3.14 MPa (32.0 kgf/sq.cm, 455 psi) or more) The pressure sensor, which is installed on the pipe of the high pressure side to detect refrigerant pressure, outputs a refrigerant pressure signal to the A/C amplifier. The A/C amplifier converts this signal to pressure according to the sensor characteristics to control the compressor.
Wiring Diagram:
INSPECTION PROCEDURE
Step 1-3:
Step 3 (Continued)-4:
Step 4 (Continued)-5:
Step 5 (Continued)-6:
Step 6 (Continued)-7:
Step 7 (Continued)-10:
Step 10 (Continued)-11:
Step 11 (Continued)-13:
Step 13 (Continued)-15:
Step 15 (Continued)-18:
Step 18 (Continued):
