Zero Point Calibration of Acceleration Sensor Undone

DTC C1336/39 Zero Point Calibration of Acceleration Sensor Undone

DESCRIPTION

DTC Detection Condition:

The skid control ECU receives signals from the yaw rate sensor via CAN communication system.

Yaw rate sensor has the built-in deceleration sensor.

If there is trouble in the bus lines between the yaw rate and deceleration sensor and CAN communication system, the DTC U0123/62 (yaw rate sensor communication trouble) and U0124/95 (deceleration sensor communication trouble) are output.

The DTC is also output when the calibration has not been completed.

Wiring Diagram:

Step 1-3:

INSPECTION PROCEDURE

HINT: When U0073/94, U0100/65, U0123/62, U0124/95 or U0126/63 are output accompanied with C1210/36 or C1336/39, inspect and repair the trouble areas indicated by U0073/94, U0100/65, U0123/62, U0124/95 or U0126/63 first.