Removal and Replacement

REAR BUMPER

Rear Bumper:

REMOVAL

1. REMOVE REAR BUMPER COVER





a. Put protective tape under the quarter panel.
b. Partially the fender liner.

HINT: Do not remove the fender liner completely but partially so that the bumper cover can be removed.

c. Remove the 2 screws and 8 clips.
d. Using a screwdriver, disengage the claws and remove the cover.

HINT: Tape the screwdriver tip before use.

INSTALLATION

1. INSTALL REAR BUMPER COVER





a. Install the rear bumper cover with the 2 screws and 8 clips.