Power Back Door System

DATA LIST / ACTIVE TEST

1. DATA LIST

HINT: Using the DATA LIST displayed on the intelligent tester, you can read the value of the switch, sensor, actuator, etc. without parts removal. Reading the DATA LIST as the first step of troubleshooting is one way to shorten the labor time.

a. Connect the intelligent tester to the DLC3.
b. Turn the ignition switch ON.
c. Read the DATA LIST according to the display on the tester.








*1 In case that the "CAUTION" is displayed even without applying resistance in each range, there must be a foreign object caught in that range.
*2 "0.0s" appearing on the display of the intelligent tester means that a 1-press of the satellite switch operates the power back door.

2. ACTIVE TEST

HINT: Performing the ACTIVE TEST using the intelligent tester allows you to operate the relay, VSV, actuator, etc. without parts removal. Performing the ACTIVE TEST as the first step of troubleshooting is one way to shorten the labor time. It is possible to display the DATA LIST during the ACTIVE TEST.

a. Connect the intelligent tester to the DLC3.
b. Turn the ignition switch ON.
c. Perform the ACTIVE TEST according to the display on the tester.