Outer Rear View Mirror

OUTER REAR VIEW MIRROR

Outer Rear View Mirror:

REMOVAL

HINT: On the RH side, use the same procedures as on the LH side.

1. REMOVE FRONT DOOR SERVICE HOLE COVER LH
a. Remove the front lower frame bracket garnish LH.
b. Remove the front door inside handle bezel plug LH.
c. Remove the front armrest base panel upper LH.
d. Remove the power window regulator master switch.
e. Remove the front door trim board LH.
f. Remove the front door service hole cover LH.

2. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY LH





a. Disconnect the connector.
b. Remove the 3 nuts and mirror.

INSTALLATION

1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH





a. Install the mirror with the 3 nuts.

Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)

b. Connect the connector.