Integration Control and Panel

Integration Control And Panel:

INTEGRATION CONTROL AND PANEL

REMOVAL

1. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER NO.1
2. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER NO.2
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
4. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER
5. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH
6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System)
7. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)

8. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

a. Remove the 4 screws, and release the integration control & panel assembly.
b. Disconnect the connectors and remove the integration control & panel assembly.

INSTALLATION

1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
2. INSTALL RADIO RECEIVER WITH BRACKET (w/ Navigation System)
3. INSTALL RADIO RECEIVER WITH BRACKET (w/o Navigation System)
4. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH
5. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER
6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
7. INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER NO.2
8. INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER NO.1