Diagnosis System

DIAGNOSIS SYSTEM

1. CHECK DLC3







a. The vehicle's ECM uses the ISO 15765-4 for communication The terminal arrangement of the DLC3 complies with SAE J1962 and matches the ISO 15765-4 format.

HINT: Connect the cable of the intelligent tester to the DLC3, turn the ignition switch to the ON position and attempt to use the tester If the display indicates that a communication error has occurred, there is a problem either with the vehicle or with the tester If communication is normal when the tester is connected to another vehicle, inspect the DLC3 of the original vehicle.

If communication is still not possible when the tester is connected to another vehicle, the problem may be in the tester itself.Consult the Service Department listed in the tester's instruction manual.