Removal and Replacement

Fog Light Assembly:

FOG LIGHT ASSEMBLY

REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT BUMPER ASSEMBLY
3. REMOVE FOG LIGHT ASSEMBLY




a. Disengage the 2 claws
b. Disengage the 2 pins and remove the fog light assembly.

INSTALLATION

1. INSTALL FOG LIGHT ASSEMBLY




a. Install the fog light assembly with the 2 claws and 2 pins.

2. INSTALL FRONT BUMPER ASSEMBLY
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. VEHICLE PREPARATION FOR FOG LIGHT AIMING
5. PREPARATION FOR FOG LIGHT AIMING
6. FOG LIGHT AIMING INSPECTION
7. FOG LIGHT AIMING ADJUSTMENT