Removal and Replacement

Rear Combination Light Assembly:

REAR COMBINATION LIGHT ASSEMBLY

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE REAR COMBINATION LIGHT ASSEMBLY




a. Remove the 2 bolts.
b. Disengage the 2 pins and separate the rear combination light assembly as shown in the illustration.
c. Disconnect the connector and remove the rear combination light assembly.

INSTALLATION

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY

a. Connect the connector.




b. Install the rear combination light assembly with the 2 bolts and 2 pins as shown in the illustration.

Torque: 5.4 N.m(55 kgf.cm, 48 in.lbf)

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL