Power Mirror Switch: Testing and Inspection
OUTER MIRROR SWITCHINSPECTION
1. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Memory)
a. The L side of the left / right adjustment switch: Inspect the mirror switch resistance.
If the result is not as specified, replace the switch assembly.
b. The R side of the left / right adjustment switch: Inspect the mirror switch resistance.
If the result is not as specified, replace the switch assembly.
2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Memory)
a. Remove the outer mirror control switch.
b. Measure the resistance according to the value(s) in the table below when the switch is operated.
