Flex Plate

DRIVE PLATE AND RING GEAR SUB-ASSEMBLY
- Using SST, hold the crankshaft.
SST 09213-70011 (09213-70020), 09330-00021





- Apply adhesive to 2 or 3 threads of the mounting bolt end.
Adhesive: Part No. 08833-00070, THREE BOND 1324 or equivalent





(1) Install the front spacer, drive plate and rear spacer on the crankshaft.
(2) Install and tighten the 8 mounting bolts uniformly in several steps.
Torque: 83 Nm (850 kgf-cm, 61 ft. lbs.)