ABS (Antilock Brake System)

DIAGNOSTIC TROUBLE CODE CHART

NOTE: When removing any parts, turn the ignition switch to OFF.

C0200/31-C1235/35:

C1236/36-C1337/37:

HINT:
- Using SST 09843-18040, connect terminal TC and CG of the DLC3.
- If no abnormality is found when inspecting parts, inspect the ECU and ground points for poor contact.
- If a DTC is displayed during the DTC check, check the circuit for the DTC listed in the table. For details of each DTC, refer to the image indicated.
- When 2 or more DTCs are recorded and the problem cannot be identified, perform circuit inspection of the other DTCs.