Outer Rear View Mirror

OUTER REAR VIEW MIRROR

Outer Rear View Mirror:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH (w/ Power Window)
3. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH (w/o Power Window)
4. REMOVE FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY
5. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Double Cab)
6. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Access Cab)
7. REMOVE FRONT DOOR TRIM PANEL ASSEMBLY (w/ Power Window)
8. REMOVE FRONT DOOR TRIM PANEL ASSEMBLY (w/ o Power Window)
9. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY





a. Disconnect the outer rear view mirror connector (w/ Power mirror).
b. Remove the 3 nuts.
c. Disengage the claw and remove the outer rear view mirror.

10. REMOVE OUTER REAR VIEW MIRROR





a. Apply protective tape to the outer circumference of the outer rear view mirror, as shown in the illustration.
b. Using a screwdriver with its tip taped in protective tape, disengage the 2 claws.
c. Disengage the 2 claws and remove the outer rear view mirror.

INSTALLATION

1. REMOVE OUTER REAR VIEW MIRROR





a. Engage the 2 claws into the outer rear view mirror.
b. Engage the 2 claws and install the outer rear view mirror.

2. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY





a. Engage the claw and install the outer rear view mirror.
b. Tighten the 3 nuts.

Torque: 8.0 N.m (80 kgf.cm, 71 in.lbf)

c. Connect the outer rear view mirror connector (w/ Power Mirror).

3. REMOVE FRONT DOOR TRIM PANEL ASSEMBLY (w/ Power Window)
4. REMOVE FRONT DOOR TRIM PANEL ASSEMBLY (w/ o Power Window)
5. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Double Cab)
6. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Access Cab)
7. REMOVE FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY
8. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH (w/ Power Window)
9. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH (w/o Power Window)
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)