With Manufacturer's Scan Tool

DTC CHECK (for Using a Intelligent Tester)




a. Check DTCs.

1. Connect the intelligent tester to the DLC3.
2. Turn the ignition switch to the ON position.
3. Turn the tester ON.
4. Read the DTCs by following the prompts on the tester screen.

HINT: Refer to the intelligent tester operator's manual for further details.

END OF DTC CHECK

a. Turn the ignition switch to the ON position
b. Check that the ABS warning light and VSC OFF indicator light go off within approximately 3 seconds.
c. Turn the ignition switch to OFF.