Fog/Driving Lamp: Service and Repair

Fog Light Assembly:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FOG LIGHT ASSEMBLY




a. Disconnect the connector.
b. Disengage the 2 claws and remove the fog light assembly LH.




c. To remove the fog light socket and bulb, turn them in the direction indicated by the arrow in the illustration.
d. Remove the fog light bulb from the light socket.

INSTALLATION

1. INSTALL FOG LIGHT ASSEMBLY




a. Install the fog light bulb into the light socket.
b. To install the fog light bulb socket and bulb, turn them in the direction indicated by the arrow in the illustration.




c. Engage the 2 claws and install the fog light assembly LH.
d. Connect the connector.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)

3. VEHICLE PREPARATION FOR FOG LIGHT AIM ADJUSTMENT
4. PREPARATION FOR FOG LIGHT AIMING
5. FOG LIGHT AIMING INSPECTION
6. FOG LIGHT AIMING ADJUSTMENT