Trailer Lighting Relay: Service and Repair

Towing Converter Relay:

TOWING CONVERTER RELAY

REMOVAL

1. BOLT, SCREW AND NUT TABLE

HINT: All bolts, screws and nuts relevant to installing and removing the instrument panel are shown along with their alphabetic codes shown in the table.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.

3. REMOVE FRONT FLOOR FOOTREST
4. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab)
5. REMOVE FRONT DOOR SCUFF PLATE LH (for Access Cab)
6. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab)
7. REMOVE FRONT DOOR SCUFF PLATE RH (for Regular Cab)
8. REMOVE FRONT DOOR SCUFF PLATE RH (for Access Cab)
9. REMOVE FRONT DOOR SCUFF PLATE RH (for Double Cab)
10. REMOVE COWL SIDE TRIM BOARD LH (for Regular Cab)
11. REMOVE COWL SIDE TRIM BOARD LH (for Access Cab)
12. REMOVE COWL SIDE TRIM BOARD LH (for Double Cab)
13. REMOVE COWL SIDE TRIM BOARD RH (for Regular Cab)
14. REMOVE COWL SIDE TRIM BOARD RH (for Access Cab)
15. REMOVE COWL SIDE TRIM BOARD RH (for Double Cab)
16. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
17. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
18. REMOVE FRONT PILLAR GARNISH LH (for Regular Cab)
19. REMOVE FRONT PILLAR GARNISH LH (for Access Cab)
20. REMOVE FRONT PILLAR GARNISH LH (for Double Cab)
21. REMOVE FRONT PILLAR GARNISH RH (for Regular Cab)
22. REMOVE FRONT PILLAR GARNISH RH (for Access Cab)
23. REMOVE FRONT PILLAR GARNISH RH (for Double Cab)
24. REMOVE INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake)
25. REMOVE INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake)
26. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission on Separate Seat Type)
27. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Manual Transmission on Separate Seat Type)
28. REMOVE REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type)
29. REMOVE INSTRUMENT PANEL CUP HOLDER TRAY (for Automatic Transmission on Separate Seat Type)
30. REMOVE FRONT CONSOLE BOX (for Automatic Transmission on Separate Seat Type)
31. REMOVE FRONT CONSOLE BOX (for Manual Transmission on Separate Seat Type)
32. REMOVE FRONT CONSOLE BOX (for Automatic Transmission on Bench Seat Type)
33. REMOVE FRONT CONSOLE BOX (for Manual Transmission on Bench Seat Type)
34. REMOVE AIR CONDITIONING CONTROL ASSEMBLY
35. REMOVE RADIO RECEIVER ASSEMBLY
36. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
37. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINFISH PANEL
38. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
39. REMOVE COMBINATION METER ASSEMBLY
40. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY
41. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
42. REMOVE INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY RH
43. REMOVE LOWER INSTRUMENT PANEL LH
44. REMOVE LOWER INSTRUMENT COVER SUB-ASSEMBLY
45. REMOVE INSTRUMENT SIDE PANEL RH
46. DISCONNECT PASSENGER AIRBAG CONNECTOR
47. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY W/ PASSENGER AIRBAG ASSEMBLY

48. REMOVE TOWING CONVERTER RELAY
a. Disconnect the connector.
b. Remove the bolt and towing converter relay.

INSTALLATION

1. INSTALL TOWING CONVERTER RELAY
a. Install the towing converter relay with the bolt.

Torque: 7.0 N.m (71 kgf.cm, 62 in.lbf)

b. Connect the connector.

2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY W/ PASSENGER AIRBAG ASSEMBLY
3. CONNECT PASSENGER AIRBAG CONNECTOR
4. INSTALL INSTRUMENT SIDE PANEL RH
5. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY
6. INSTALL LOWER INSTRUMENT PANEL LH
7. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY RH
8. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
9. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY
10. INSTALL COMBINATION METER ASSEMBLY (See
11. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
12. INSTALL LOWER N0.1 INSTRUMENT PANEL FINISH PANEL
13. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
14. INSTALL RADIO RECEIVER ASSEMBLY
15. INSTALL AIR CONDITIONING CONTROL ASSEMBLY
16. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Bench Seat Type)
17. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Bench Seat Type)
18. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Separate Seat Type)
19. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Separate Seat Type)
20. INSTALL INSTRUMENT PANEL CUP HOLDER TRAY (for Automatic Transmission on Separate Seat Type)
21. INSTALL REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type)
22. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Manual Transmission on Separate Seat Type)
23. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission on Separate Seat Type)
24. INSTALL INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake)
25. INSTALL INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake)
26. INSTALL FRONT PILLAR GARNISH LH (for Regular Cab)
27. INSTALL FRONT PILLAR GARNISH LH (for Access Cab)
28. INSTALL FRONT PILLAR GARNISH LH (for Double Cab)
29. INSTALL FRONT PILLAR GARNISH RH (for Regular Cab)
30. INSTALL FRONT PILLAR GARNISH RH (for Access Cab)
31. INSTALL FRONT PILLAR GARNISH RH (for Double Cab)
32. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
33. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
34. INSTALL COWL SIDE TRIM BOARD LH (for Regular Cab)
35. INSTALL COWL SIDE TRIM BOARD LH (for Access Cab)
36. INSTALL COWL SIDE TRIM BOARD LH (for Double Cab)
37. INSTALL COWL SIDE TRIM BOARD RH (for Regular Cab)
38. INSTALL COWL SIDE TRIM BOARD RH (for Access Cab)
39. INSTALL COWL SIDE TRIM BOARD RH (for Double Cab)
40. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab)
41. INSTALL FRONT DOOR SCUFF PLATE LH (for Access Cab)
42. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab)
43. INSTALL FRONT DOOR SCUFF PLATE RH (for Regular Cab)
44. INSTALL FRONT DOOR SCUFF PLATE RH (for Access Cab)
45. INSTALL FRONT DOOR SCUFF PLATE RH (for Double Cab)
46. INSTALL FRONT FLOOR FOOTREST
47. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)

48. INSPECT SRS WARNING LIGHT