Ignition Switch: Service and Repair

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL




2. REMOVE STEERING COLUMN COVER LWR
a. Remove the 2 screws.
b. Disengage the 2 claws and remove the steering column cover LWR.




3. REMOVE IGNITION SWITCH
a. Disconnect the connector.
b. Disengage the 2 clamps, then remove the ignition switch.

INSTALLATION

1. INSTALL IGNITION SWITCH
2. INSTALL STEERING COLUMN COVER LWR
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)