Air Flow Meter/Sensor: Service and Repair

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE V-BANK COVER
3. REMOVE MASS AIR FLOW METER




a. Disconnect the connector.
b. Remove the 2 screws, then remove the mass air flow meter.

INSTALLATION

1. INSTALL MASS AIR FLOW METER
2. INSTALL V-BANK COVER
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)