Air Fuel Ratio Sensor

REMOVAL

1. DISCONNECT CABLE FROM BATTERY NEGATIVE TERMINAL
2. REMOVE AIR FUEL RATIO SENSOR




a. Disconnect the 2 air fuel ratio sensor connectors.
b. Remove the 2 air fuel ratio sensors from the exhaust manifold.

INSTALLATION

1. INSTALL AIR FUEL RATIO SENSOR




a. Using SST, install the 2 air fuel ratio sensors onto the exhaust manifold.

SST 09224-00010

Torque: 44 N.m (449 kgf.cm, 33 ft.lbf)

b. Connect the 2 air fuel ratio sensor connectors.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)

3. CHECK FOR EXHAUST GAS LEAKAGE