Cruise Control Switch: Service and Repair

Cruise Control Main Switch:

Cruise Control Main Switch

REMOVAL

1. PRECAUTION, refer to Restraint Systems Service Precautions.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least for 90 seconds after disconnecting the cable to prevent the airbag from working.
3. REMOVE LOWER NO. 2 STEERING WHEEL COVER
4. REMOVE LOWER NO. 3 STEERING WHEEL COVER
5. REMOVE STEERING PAD ASSEMBLY
6. REMOVE CRUISE CONTROL MAIN SWITCH




a. Disconnect the connector and remove the 2 screws.




b. Remove the cruise control main switch from the steering wheel.

INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH




a. Install the cruise control main switch with the 2 screws and connect the connector.

2. INSTALL STEERING PAD ASSEMBLY
3. INSTALL LOWER NO. 3 STEERING WHEEL COVER
4. INSTALL LOWER NO. 2 STEERING WHEEL COVER
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)

6. INSPECT STEERING PAD ASSEMBLY
7. INSPECT SRS WARNING LIGHT