Headlamp Dimmer Switch: Service and Repair

Headlight Dimmer Switch:

HEADLIGHT DIMMER SWITCH

REMOVAL

1. PRECAUTION
Observe the Restraint System; Service Precautions.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.

3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE NO. 2 STEERING WHEEL LOWER COVER
5. REMOVE NO. 3 STEERING WHEEL LOWER COVER
6. REMOVE HORN BUTTON ASSEMBLY
7. REMOVE STEERING WHEEL ASSEMBLY
8. REMOVE STEERING COLUMN LOWER COVER
9. REMOVE STEERING COLUMN UPPER COVER
10. REMOVE SPIRAL CABLE SUB-ASSEMBLY
11. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
12. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY




a. Disconnect the connector.
b. Remove the headlight dimmer switch assembly as shown in the illustration.




c. Disengage the 2 claws and remove the headlight dimmer switch assembly.

INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY




a. Engage the 2 claws and install the headlight dimmer switch assembly as shown in the illustration.




b. Install the headlight dimmer switch assembly with the clamp.
c. Connect the connector.

2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
3. INSTALL SPIRAL CABLE SUB-ASSEMBLY
4. INSTALL STEERING COLUMN UPPER COVER
5. INSTALL STEERING COLUMN LOWER COVER
6. CENTER SPIRAL CABLE
7. INSTALL STEERING WHEEL ASSEMBLY
8. INSPECT STEERING WHEEL CENTER POINT
9. INSPECT HORN BUTTON ASSEMBLY
10. INSTALL HORN BUTTON ASSEMBLY
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)

12. INSPECT SRS WARNING LIGHT
13. INSTALL NO. 3 STEERING WHEEL LOWER COVER
14. INSTALL NO. 2 STEERING WHEEL LOWER COVER