Camshaft Bearing

Camshaft (For Bank 1)

INSTALL CAMSHAFT





(a) Install the 4 bearing caps in the proper locations as shown.
(b) Apply a light coat of engine oil to the threads and under the heads of the bearing cap bolts.





(c) Using several steps, uniformly install and tighten the 8 bearing cap bolts in the sequence shown in the illustration.
Torque:
10 mm (0.39 inch) head 9.0 Nm (92 kgf-cm, 80 inch lbs.)
12 mm (0.47 inch) head 24 Nm (245 kgf-cm, 18 ft. lbs.)

INSTALL NO.2 CAMSHAFT





(a) Install the 4 bearing caps in the proper locations as shown.
(b) Apply a light coat of engine oil to the threads and under the heads of the bearing cap bolts.





(c) Using several steps, uniformly install and tighten the 8 bearing cap bolts in the sequence shown in the illustration.
Torque:
10 mm (0.39 inch) head 9.0 Nm (92 kgf-cm, 80 inch lbs.)
12 mm (0.47 inch) head 24 Nm (245 kgf-cm, 18 ft. lbs.)


Camshaft (For Bank 2)

INSTALL NO.3 CAMSHAFT SUB-ASSEMBLY





(a) Install the 4 bearing caps in the proper locations as shown.
(b) Apply a light coat of engine oil to the threads and under the heads of the bearing cap bolts.





(c) Using several steps, uniformly install and tighten the 8 bearing cap bolts in the sequence shown in the illustration.
Torque:
10 mm (0.39 inch) head 9.0 Nm (92 kgf-cm, 80 inch lbs.)
12 mm (0.47 inch) head 24 Nm (245 kgf-cm, 18 ft. lbs.)

INSTALL NO.4 CAMSHAFT SUB-ASSEMBLY





(a) Install the 4 bearing caps in the proper locations as shown.
(b) Apply a light coat of engine oil to the threads and under the heads of the bearing cap bolts.





(c) Using several steps, uniformly install and tighten the 8 bearing cap bolts in the sequence shown in the illustration.
Torque:
10 mm (0.39 inch) head 9.0 Nm (92 kgf-cm, 80 inch lbs.)
12 mm (0.47 inch) head 24 Nm (245 kgf-cm, 18 ft. lbs.)