Component Tests and General Diagnostics

INSPECTION
1. INSPECT TIRES
(a) Check the tires for wear and proper inflation pressure.

Cold tire inflation pressure:

(b) Using a dial indicator, check the tire runout.
Tire runout:
3.0 mm (0.118 in.) or less





2. ROTATE TIRES

HINT: See the illustration on the left for how to rotate the tires, when you include the spare tire in the rotation.





3. INSPECT WHEEL BALANCE
(a) Perform off-car balancing.
(b) If necessary, perform on-car balancing.
Imbalance after adjustment:
8 g (0.018 lb) or less

4. INSPECT FRONT AXLE HUB BEARING
5. INSPECT REAR AXLE HUB BEARING