Tire Pressure Warning Reset Switch Circuit
Tire Pressure Warning Reset Switch CircuitDESCRIPTION
Receiving a signal from the tire pressure warning reset switch, the tire pressure warning ECU and receiver indicates the initialization of the tire pressure warning system.
WIRING DIAGRAM:
INSPECTION PROCEDURE
NOTICE:
- When replacing the tire pressure warning ECU, read the IDs stored in the old ECU using the intelligent tester and write them down before removal.
- It is necessary to perform initialization after registration of the transmitter IDs into the tire pressure warning ECU after the ECU has been replaced.
Step 1:
Step 2-3:
