Crankshaft, Engine
CrankshaftCrankshaft
Thrust clearance
STD 0.020 to 0.220 mm (0.0008 to 0.0087 inch)
Maximum 0.30 mm (0.0118 inch)
Thrust washer thickness 2.440 to 2.490 mm (0.0961 to 0.0980 inch)
Crankshaft journal bore diameter on cylinder block with bearing (Reference)
Mark 1 64.004 to 64.010 mm (2.5198 to 2.5201 inch)
Mark 2 64.011 to 64.016 mm (2.5201 to 2.5203 inch)
Mark 3 64.017 to 64.022 mm (2.5203 to 2.5206 inch)
Crankshaft journal oil clearance
STD No. 3 0.030 to 0.055 mm (0.0012 to 0.0022 inch)
STD Others 0.024 to 0.049 mm (0.0009 to 0.0019 inch)
Maximum 0.10 mm (0.0039 inch)
Crankshaft journal diameter
No. 3 59.981 to 59.994 mm (2.3615 to 2.3620 inch)
Others 59.987 to 60.000 mm (2.3619 to 2.3622 inch)
Crank pin diameter 52.989 to 53.002 mm (2.0862 to 2.0867 inch)
Circle runout
Maximum 0.03 mm (0.0012 inch)
Crankshaft journal taper and out-of-round
Maximum 0.005 mm (0.0002 inch)
Crank pin taper and out-of-round
Maximum 0.003 mm (0.0001 inch)