Keyless Entry Transmitter Battery: Service and Repair
REPLACEMENTREPLACE TRANSMITTER BATTERY
NOTE: Be careful when handling each component as they are precision electronic components.
a. Insert a precision screwdriver into the gap, and turn the screwdriver to detach the cover.
HINT: Tape the screwdriver tip before use.
NOTE: Do not forcibly pry up the cover.
b. Remove the battery (lithium battery: CR2032).
NOTE:
- Do not push the terminals with your finger.
- Do not forcibly pry up the battery. The terminals may be damaged.
- Do not touch the battery with wet hands. Water may cause rust.
- Do not touch or move any components inside the transmitter, it may interfere with the proper operation.
c. Install a battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.
NOTE:
- Do not bend the transmitter battery electrode during insertion.
- Keep the transmitter cover interior free of dust and oil.
d. Attach the cover securely.