Operation CHARM: Car repair manuals for everyone.
Home >> Toyota Truck >> 2007 >> Tundra 2WD V6-4.0L (1GR-FE) >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Variable Valve Timing >> Variable Valve Timing Actuator >> Testing and Inspection >> Camshaft Timing Oil Control Valve Assembly >> On-Vehicle Inspection

On-Vehicle Inspection

ON-VEHICLE INSPECTION

1. INSPECT CAMSHAFT OIL CONTROL VALVE
a. Connect the intelligent tester or Techstream to the DLC3.
b. Start the engine and turn the tester ON.
c. Warm up the engine.

d. Enter the following menus:
1. Intelligent tester - Select: DIAGNOSIS / ENHANCED OBD II / ACTIVE TEST / VVT CTRL B1 or VVT CTRL B2.
2. Techstream - Select: Powertrain / Engine and ECT / Active Test / Control the VVT System (Bank 1) or Control the VVT System (Bank 2).




e. Check the engine speed while operating the Oil Control Valve (OCV) using the tester.

If the result is not as specified, check the oil control valve, wirings and camshaft timing gear.
pro multis · About Operation CHARM