Overhaul

DISASSEMBLY

HINT:
- Use the same procedures for the RH and LH side.
- The procedures listed below are for the LH side.




1. REMOVE TAIL AND STOP LIGHT BULB
a. Turn the bulb/socket unit in the direction indicated by the arrow and pull to remove it.
b. Remove the bulb from the socket.




2. REMOVE REAR TURN SIGNAL LIGHT BULB
a. Turn the bulb/socket unit in the direction indicated by the arrow and pull to remove it.
b. Remove the bulb from the socket.




3. REMOVE BACK-UP LIGHT BULB
a. Turn the bulb/socket unit in the direction indicated by the arrow and pull to remove it.
b. Remove the bulb from the socket.

REASSEMBLY

HINT:
- Use the same procedures for the RH and LH side.
- The procedures listed below are for the LH side.




1. INSTALL BACK-UP LIGHT BULB
a. Install the bulb to the socket.
b. Insert the bulb/socket unit into the combination light.
c. Turn the bulb/socket unit in the direction indicated by the arrow to install it.




2. INSTALL REAR TURN SIGNAL LIGHT BULB
a. Install the bulb to the socket.
b. Insert the bulb/socket unit into the combination light.
c. Turn the bulb/socket unit in the direction indicated by the arrow to install it.




3. INSTALL TAIL AND STOP LIGHT BULB
a. Install the bulb to the socket.
b. Insert the bulb/socket unit into the combination light.
c. Turn the bulb/socket unit in the direction indicated by the arrow to install it.