Solar Sensor: Testing and Inspection

INSPECTION

INSPECT AUTOMATIC LIGHT CONTROL SENSOR (SOLAR SENSOR)







Connect the battery's positive (+) lead to terminal 6 and the negative (-) lead to terminal 3, then measure the voltage according to the value(s) in the table given.

NOTE: The connection procedure for using a digital tester such as a TOYOTA electrical tester is shown.

HINT:
- As the inspection light is moved away from the sensor, the voltage decreases.
- Use an incandescent light for inspection. Bring it within 30 cm (11.8 in.) of the solar sensor.

If the result is not as specified, replace the solar sensor.