Tire Pressure Warning Reset Switch: Service and Repair
TIRE PRESSURE WARNING RESET SWITCHREMOVAL
1. REMOVE INSTRUMENT SIDE PANEL LH
2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
3. REMOVE TIRE PRESSURE WARNING RESET SWITCH
(a) Disconnect the switch connector.
(b) Detach the 2 claws and remove the reset switch.
INSPECTION
Component without harness connected: (Tire Pressure Warning Reset Switch):
1. CHECK TIRE PRESSURE WARNING RESET SWITCH
(a) Measure the resistance of the switch.
Standard resistance:
If the result is not as specified, replace the switch.
INSTALLATION
1. INSTALL TIRE PRESSURE WARNING RESET SWITCH
(a) Attach the 2 claws to install the reset switch.
(b) Connect the switch connector.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
3. INSTALL INSTRUMENT SIDE PANEL LH