Alarm System Transponder: Service and Repair

Transponder Key Amplifier:

TRANSPONDER KEY AMPLIFIER

REMOVAL

1. REMOVE LOWER STEERING COLUMN COVER




a. While turning the steering wheel to the right and left, remove the 2 screws.
b. Detach the 2 claws and remove the lower steering column cover.

2. REMOVE TRANSPONDER KEY AMPLIFIER




a. Using a screwdriver, widen the claws attached to the upper bracket by approximately 1 mm (0.0394 in.).
b. Pull out the transponder key amplifier with the claws open.

NOTE: Take care not to apply excessive force to prevent the case from being damaged.

INSTALLATION

1. INSTALL TRANSPONDER KEY AMPLIFIER




a. Align the transponder key amplifier with the installation position of the upper bracket with the amplifier inclined.
b. Push the transponder key amplifier and install it to the upper bracket.

NOTE: Do not push the amplifier upward with excessive force.

2. INSTALL LOWER STEERING COLUMN COVER
a. Attach the 2 claws to install the lower steering column cover.
b. Install the 2 screws.