Brake Light Switch: Service and Repair

Stop Light Switch:

STOP LIGHT SWITCH

REMOVAL




1. REMOVE STOP LIGHT SWITCH ASSEMBLY
a. Disconnect the connector.
b. Rotate the stop light switch in the direction of the arrow and remove it.




2. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER
a. Detach the 2 claws and remove the adjuster.

INSTALLATION




1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER
a. Attach the 2 claws to install the adjuster.




2. INSTALL STOP LIGHT SWITCH ASSEMBLY
a. Insert the stop light switch so that it contacts the pedal cushion.

NOTE: insert the stop light switch with a force of less than 98 N.m (1000 kgf.cm 72.3 ft.lbf).




b. Rotate the stop light switch clockwise 90 ° to install it to the adjuster.

Standard: A: 1.5 to 2.5 mm (0.0591 to 0.0984 in.)

NOTE:
- When the stop light switch is rotated clockwise, make sure the stop light switch moves outward less than 1 pitch (pitch: distance between 2 screw threads).
- Rotate the stop light switch with a torque of 1.5 N.m (15 kgf.cm.13 in.lbf).
- Do not allow silicon grease to contact the stop light switch.




c. Connect the connector.