Door Control Receiver (For Regular Cab)

Door Control Receiver (For Regular Cab):

Door Control Receiver (For Regular Cab):

DOOR CONTROL RECEIVER (FOR REGULAR CAB)

REMOVAL

1. REMOVE UPPER BACK PANEL GARNISH
2. REMOVE LUGGAGE COMPARTMENT BOX LH
3. REMOVE LUGGAGE COMPARTMENT BOX RH
4. REMOVE FRONT DOOR SCUFF PLATE RH
a. Remove the front door scuff plate.

HINT: The procedures listed are for the LH side.

5. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
6. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY RH
7. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH
8. REMOVE DOOR CONTROL RECEIVER




a. Disconnect the door control receiver connector.
b. Remove the bolt and receiver.

INSTALLATION

1. INSTALL DOOR CONTROL RECEIVER




a. Install the receiver with the bolt.
b. Connect the door control receiver connector.

2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH
3. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY RH
4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
5. INSTALL FRONT DOOR SCUFF PLATE RH
a. Install the front door scuff plate.

HINT: The procedures listed are for the LH side.

6. INSTALL LUGGAGE COMPARTMENT BOX RH
7. INSTALL LUGGAGE COMPARTMENT BOX LH
8. INSTALL UPPER BACK PANEL GARNISH