Perform Active Test

PERFORM ACTIVE TEST

HINT: Using the intelligent tester or Techstream to perform Active Tests allows relays, VSVs, actuators and parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing the Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be display while performing Active Test.

a. Connect the intelligent tester or Techstream to the DLC3.
b. Turn the ignition switch ON.
c. Enter the following menus:
1. Intelligent tester - Select: DIAGNOSIS / OBD/MOBD / MAIN BODY / ACTIVE TEST.
2. Techstream - Select: Body Electrical / Main Body / Active Test.

d. Perform the Active Test by referring to the table given.




1. Intelligent tester




2. Techstream