Damaged Vehicle Disposal Precaution (SRS Airbag System)

DAMAGED VEHICLE DISPOSAL PRECAUTION (SRS AIRBAG SYSTEM)

For SRS airbag system adjustment service and repair procedures, refer to Restraint Systems.
1. When using an electric welder, first remove all airbags and seat belt pretensioners.
2. If impacts are likely to occur to the front airbag sensors, side airbag sensors, door side airbag sensors or center airbag sensor, remove each sensor as necessary beforehand.
3. Do not allow the front airbag sensors, side airbag sensors, door side airbag sensors or center airbag sensor to become heated to high temperatures.