Programming and Relearning
CUSTOMIZE PARAMETERS1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER OR TECHSTREAM
NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
a. Connect the intelligent tester or Techstream to the DLC3.
b. Turn the ignition switch ON.
c. Turn the tester ON.
d. Enter the following menus:
1. Intelligent tester - Select: CUSTOMIZE.
2. Techstream - Select: Customize Setting.
e. Select the setting by referring to the table given.
1. Intelligent tester
2. Techstream
2. CUSTOMIZING FUNCTION WITH MULTI-INFORMATION DISPLAY (w/ Multi-information Display)
Part 1:
Part 2:
Part 3:
Part 4:
a. Using the SETUP switch and SELECT switch, the following functions can be customized through the multi-information display. Refer to the illustration.
- Unit setting
- Wireless door lock control system (answer-back function, automatic lock function, 2-step unlock function)
- Power door lock control system (automatic door lock function, automatic door unlock function)
- Lighting system (auto light turn off function)
- Default setting (customize setting cancel function)