Crankshaft Position Sensor: Service and Repair

REMOVAL




1. REMOVE CRANKSHAFT POSITION SENSOR PROTECTOR
a. Remove the 2 bolts and sensor protector.




2. REMOVE CRANKSHAFT POSITION SENSOR
a. Disconnect the sensor connector.
b. Remove the bolt and sensor.

INSTALLATION




1. INSTALL CRANKSHAFT POSITION SENSOR
a. Install the sensor with the bolt.

Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)

b. Connect the sensor connector.




2. INSTALL CRANKSHAFT POSITION SENSOR PROTECTOR
a. Install the sensor protector with the 2 bolts.

Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)