P3147-240

P310 HYBRID VEHICLE CONTROL: HYBRID CONTROL SYSTEM: P3147-240: Transmission Malfunction

DTC P3147-240 - Transmission Malfunction

DTC P3147-242 - Transmission Malfunction

DESCRIPTION

The hybrid vehicle transaxle assembly consists of the power split planetary gear unit, MG1, MG2, and the motor speed reduction planetary gear unit. The power split planetary gear unit uses a planetary gear to split engine output in accordance with driving requests while the vehicle is driven or the HV battery is charged. MG2 assists engine output while increasing vehicle drive force. MG2 also converts kinetic energy, which would otherwise be consumed in the form of heat during normal braking, into electrical energy. This recovered energy is put back into the HV battery to perform regenerative braking. MG1 generates power, which is used for charging the HV battery or driving MG2, and also regulates the amount of electricity being generated. In addition, MG1 is used as a starter motor to start the engine. The transmission input damper absorbs the torque fluctuation in the drive force from the engine.






INSPECTION PROCEDURE

PROCEDURE

1. DTC OUTPUT
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Select the following menu items: Powertrain / Hybrid Control / Trouble Codes.
(d) Check if DTCs are output.
Result:






B -- GO TO DTC CHART Diagnostic Trouble Code Descriptions
A -- REPLACE HYBRID VEHICLE TRANSAXLE ASSEMBLY