Removal

ENGINE IMMOBILISER: CERTIFICATION ECU: REMOVAL

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE RH
HINT: Use the same procedure for the RH side and LH side Removal Part 1, Step 1-62.

2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
HINT: Use the same procedure for the RH side and LH side Removal Part 1, Step 1-62.

3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal

5. REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)






(a) Disconnect the connectors.
(b) Remove the 2 nuts and the certification ECU (smart key ECU assembly).