Television Display Power Source Circuit

AUDIO / VISUAL: REAR SEAT ENTERTAINMENT SYSTEM: Television Display Power Source Circuit

Television Display Power Source Circuit

DESCRIPTION

This is the power source circuit of the television display assembly.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (TELEVISION DISPLAY ASSEMBLY - BATTERY, BODY GROUND)
(a) Disconnect the television display assembly connector.





(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:





(c) Measure the voltage according to the value(s) in the table below.
Standard voltage:






NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE