Removal

DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH (for Front Door): REMOVAL

REMOVAL

1. DISCONNECT NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation Service Precautions.
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Repair Instruction - Initialization

2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH Disassembly

3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG Disassembly

4. REMOVE ASSIST GRIP COVER Disassembly

5. REMOVE COURTESY LIGHT ASSEMBLY Disassembly

6. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY Disassembly

7. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP Disassembly

8. REMOVE FRONT DOOR SERVICE HOLE COVER Disassembly

9. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY Disassembly

10. REMOVE FRONT DOOR GLASS RUN Disassembly

11. REMOVE FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY Disassembly

12. REMOVE FRONT DOOR OUTSIDE HANDLE COVER (for Driver Side) Disassembly

13. REMOVE FRONT DOOR OUTSIDE HANDLE COVER (for Front Passenger Side) Disassembly

14. REMOVE FRONT DOOR OUTSIDE HANDLE ASSEMBLY






(a) Disconnect the connector.






(b) Remove the front door outside handle assembly as shown in the illustration.