Operation CHARM: Car repair manuals for everyone.
Home >> Toyota Truck >> 2008 >> Highlander 4WD V6-3.3L (3MZ-FE) Hybrid >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Variable Valve Timing >> Variable Valve Timing Actuator >> Service and Repair >> Installation

Installation








3MZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT OIL CONTROL VALVE: INSTALLATION

INSTALLATION

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY LH
(a) Apply a coat of engine oil to an O-ring of the oil control valve.






(b) Install the camshaft timing oil control valve with the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(c) Connect the camshaft timing oil control valve connector.
2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY RH
(a) Apply a coat of engine oil to an O-ring of the oil control valve.






(b) Install the camshaft timing oil control valve with the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
Connect the camshaft timing oil control valve connector.
3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

5. INSTALL NO. 2 ENGINE ROOM SIDE COVER LH

6. INSTALL COOL AIR INTAKE DUCT SEAL

7. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY

8. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

9. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

10. INSTALL HOOD TO COWL TOP SEAL

11. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH

12. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH
pro multis · About Operation CHARM