Operation CHARM: Car repair manuals for everyone.
Home >> Toyota Truck >> 2008 >> Highlander 4WD V6-3.3L (3MZ-FE) Hybrid >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Variable Valve Timing >> Variable Valve Timing Actuator >> Service and Repair >> Removal

Removal








3MZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT OIL CONTROL VALVE: REMOVAL

REMOVAL

1. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

3. REMOVE HOOD TO COWL TOP SEAL

4. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

5. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

6. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY

7. REMOVE COOL AIR INTAKE DUCT SEAL

8. REMOVE NO. 2 ENGINE ROOM SIDE COVER LH

9. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

10. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

11. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY RH






(a) Disconnect the camshaft timing oil control valve connector.
(b) Remove the bolt and camshaft timing oil control valve assembly.
12. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY LH






(a) Disconnect the camshaft timing oil control valve connector.
(b) Remove the bolt and camshaft timing oil control valve assembly.
pro multis · About Operation CHARM