Initialization

METER: METER / GAUGE SYSTEM: INITIALIZATION

INITIALIZATION

1. OIL MAINTENANCE INFORMATION MODE RESET OPERATION
HINT:
- The TRIP meter reset knob is located below the speedometer.
- This reset operation is required only for U.S.A.

(a) Turn the power switch on (IG).
(b) Press the ODO/TRIP switch until the TRIP meter A appears.
(c) Turn the power switch off.
(d) Turn the power switch on (IG) while pressing and holding the TRIP meter reset knob. Hold the TRIP meter reset knob until the following conditions are met and 5 seconds have passed.





- The multi-information display shows "Resetting Oil Maintenance Data".
- When the oil maintenance reminder turns off, the reset is complete.