Installation

HORN: SPIRAL CABLE: INSTALLATION

INSTALLATION

1. INSTALL SPIRAL CABLE






(a) Engage the 6 claws and 2 pins, and install the spiral cable to the steering angle sensor.
2. INSTALL SPIRAL CABLE WITH STEERING ANGLE SENSOR Installation

3. INSTALL STEERING COLUMN COVER Installation

4. ADJUST SPIRAL CABLE Installation

5. INSTALL STEERING WHEEL ASSEMBLY Installation

6. INSTALL STEERING PAD Installation

7. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

8. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Repair Instruction - Initialization

10. INSPECT STEERING PAD Installation

11. INSPECT STEERING WHEEL CENTER POINT
12. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.