Installation

3MZ-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: INSTALLATION

INSTALLATION

1. INSTALL CRANKSHAFT POSITION SENSOR
(a) Apply a light coat of engine oil to the O-ring on the crankshaft position sensor.






(b) Install the crankshaft position sensor with the bolt.
Torque: 8.0 Nm (80 kgf-cm, 71 in-lbf)
(c) Connect the crankshaft position sensor connector.
2. INSTALL FRONT FENDER APRON SEAL RH
3. INSTALL FRONT FENDER LINER RH
4. INSTALL NO. 1 ENGINE UNDER COVER Installation