Installation

3MZ-FE EMISSION CONTROL: FUEL TANK PRESSURE SENSOR: INSTALLATION

INSTALLATION

1. INSTALL VAPOR PRESSURE SENSOR ASSEMBLY






(a) Install the vapor pressure sensor assembly with the tube joint clip.

NOTE:
- Check that there are no scratches or foreign objects on the connecting part.
- Check that the vapor pressure sensor assembly is inserted securely.
- Check that the tube joint clip is on the collar of the vapor pressure sensor assembly.
- After installing the tube joint clip, check that the fuel tube joint is not pulled off.





(b) Connect the connector.
2. INSTALL FUEL TANK ASSEMBLY
Installation