Removal

3MZ-FE ENGINE CONTROL SYSTEM: AIR FUEL RATIO SENSOR: REMOVAL

REMOVAL

1. REMOVE AIR FUEL RATIO SENSOR (for Bank 2)
(a) Disconnect the air fuel ratio sensor connector and clamp.






(b) Using SST, remove the air fuel ratio sensor from the exhaust manifold sub-assembly LH.
SST: 09224-00010
NOTE: Do not damage the air fuel ratio sensor.

2. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH
HINT:
Removal.

3. REMOVE AIR FUEL RATIO SENSOR (for Bank 1)
(a) Disconnect the air fuel ratio sensor connector and clamp.






(b) Using SST, remove the air fuel ratio sensor from the exhaust manifold converter sub-assembly RH.
SST: 09224-00010
NOTE: Do not damage the air fuel ratio sensor.