Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: REMOVAL

REMOVAL
NOTE: Before removing the tire pressure warning ECU, read the registered transmitter IDs of all wheels and write them down to use for re-registration of transmitter IDs Programming and Relearning.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Repair Instruction - Initialization

2. REMOVE FRONT DOOR SCUFF PLATE RH Removal Part 1, Step 1-62

3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal Part 1, Step 1-62

4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

5. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal

6. REMOVE TIRE PRESSURE WARNING ECU






(a) Remove the nut.






(b) Disconnect the connector and remove the tire pressure warning ECU.